Mosconi ZERO 1 (AB class) Hi-End power amplifier (2-channel).

Mosconi Gladen ZERO 1 Hi-End (AB klase) pastiprinātājs (2-kanālu).

AB-Class amplifier with regulated power supply for incredible power and great dynamic sound. 
MOS HyperDrive & OverCold mode to be protagonist in SPL competitions. 
With MOS HyperDrive we have removed the limiter from an already extraordinary amplifier. 
By using MOS HyperDrive it is possible to achieve very high power, dynamic and acoustic quality at the same time, never experienced before. 
The MOS OverCold feature activates the cooling fans at maximum speed.

SPECIFICATIONS: 
Stereo Power RMS @ 4 Ohm 2 x 450W (HyperDrive = 2 x 650W) 
Stereo Power RMS @ 2 Ohm 2 x 850W (HyperDrive = 2 x 1200W) 
Bridge Power RMS @ 4 Ohm 1 x 1700W (HyperDrive = 1 x 2400W) 
Bridge Power RMS @ 2 Ohm 1 x 3000W (HyperDrive = 1 x TBD) 
DC-DC Converter Typology Regulated. 

Input Sensitivity Range 0.43 ÷ 9.5 / 1.2 ÷ 27 (HL) 
HP Filter Range (Switchable) 20 ÷ 175 Hz 
HP Filter Slope 12 - 0.7 dB/Oct (Stereo & Mono) 
LP Filter Range (Switchable) 50 ÷ 300 Hz 
LP Filter Slope 12 - 0.7 dB/Oct (Stereo & Mono) 
Band Pass Filter, High Level Input, Slot for G_cards. 
Internal Fuse 1 x 250 A. 
Dimensions 590mm x 250mm x 50mm 

IESPĒJAS: 
AB class, full MOSFET, 1 Ohm stable. 
Dumping Factor exceeds 3000 (ZERO 3) 
101dB S/N ratio (A weighted) 
Very low THD and IMD, Regulated power supply, High/Low level selector, Auto REMOTE function. 
Cross Over with separate High Pass and Low Pass filter, Band Pass allowed. 
Slot for G_cards (G_HOC, G_HP, G_LP, G_FSA) 
Remote Volume Control RTC_MOS (optional). Side panels in soft touch finishing with red LED lighting.

(*) VERY IMPORTANT NOTE - READ CAREFULLY 
4 Ohm ST or 8 Ohm BTL – CONTINUOUS SINEWAVE SIGNAL – pure resistive load or speaker load. 
2 Ohm ST or 4 Ohm BTL – MUSICAL SIGNAL – pure resistive load or speaker load. 
1 Ohm ST or 2 Ohm BTL – MUSICAL SIGNAL – speaker load only.