Trioma adapter LINE OUT (AVC-LAN->TosLink) for Lexus, Toyota (->2022). TTL-5.0

Lexus, Toyota TTL-5.0 (->2019) Line OUT for aftermarket DSP & amplifiers.

Toyota Camry (2011-2022), 
Toyota Land Cruiser 150 
Toyota Land Cruiser 200 (->2009), 
Toyota Highlander (2013-2016)..., 

Lexus LX450 / LX460d / LX570 (11.2007–07.2009), 
Lexus RX270 / RX300 / RX350 (2009-2018), 
Lexus NX200 / NX300 (-> 09.2017), 
Lexus ES250 / ES350 ,
Lexus GX400 / GX460... 

1. Emulates a standard power amplifier. 
2. Receives the main stereo signal from the standard system, as well as additional sound signals from the telephone, navigation system, parking sensors and other messages. 
3. Carries out mixing of additional signals to the main one in appropriate proportions for each audio channel using digital mixers. 
4. Generates a 24-bit digital TosLink signal at its output. 
    The digital output generates left and right channel signals with mixed service signals intended for both front and rear speakers. 
5. Stores basic adjustments in the system (volume, balance, treble and bass). 
6. Uses only a digital (24-bit) form of signal representation in the audio path. 

When the standard audio system is turned on, the adapter is initialized in the AVC-LAN bus as a standard amplifier and emulates its operation. 
Receives information about adjustments from the head unit and generates the necessary messages for the head unit... 
After all audio circuits of the interface are in working condition and the audio signal is broadcast to the TosLink output, a control voltage is generated at the "Rem.Out" pin. 
When the system is turned off, the control voltage is first removed from the REMOUT output, then the audio circuits of the interface are switched to standby mode.