Toyota C-HR (2019->) odometer "pause" for testing purposes. KMSTOP

CAN filter for Toyota C-HR (2018-2023) cars odometer "pause" for testing purposes.
KMSTOP 

To change mode the "Cancel" button (on steering wheel) should be pressed 3 times at the same pace from 1 to 2 seconds per press. 
At mode changing the High Beam indicator on dashboard blinks. 
Number of blinks corresponds to selected mode (this indication does not affect actual state of high beam lamp). 

To check current mode without changing (!) it the "Cancel" button should be pressed and held for 4 seconds.
1. High beam light on cluster will blink 1x -> KMSTOP (SPEEDSTOP) reduces (filters) at 90% of real,  (speedometer, cruise and other functions works fine) *, 
2. High beam light on cluster will blink 2x -> KMSTOP (SPEEDSTOP) reduces (filters) 50% of real, (speedometer, cruise and other functions works fine), 
3. High beam light on cluster will blink 3x -> KMSTOP (SPEEDSTOP) disabled (Factory Mode).

After Ignition OFF/ON "KMSTOP" (SPEEDSTOP) keeps selected working mode.
After disconnecting / connecting the battery, "KMSTOP" (SPEEDSTOP) goes into "Factory Mode" (disabled).
If you remove "KMSTOP" (SPEEDSTOP) adapter after test drive, odometer not changing.

Tested: C-HR (2018-2023) with analog dashboard... 
* KMSTOP (SPEEDSTOP) reduces (filters) at 100% of real - available (optional).