Available for order
In our stock 9
SKU
A2886
Hi to Low converter with "remote by sound dual " (2 channel).
Hi to Low converter with "remote by sound" and "Ground loop" isolation. (2 channel).
€69.00
Hi to Low converter with "remote by sound dual " (2 channel).
Auto remote Amp. turn On, signal noise eliminated, 2 channel output. High to Low converter with real analysis "sound signals".
1. Level conditioning 10V → 1V (60V P-P → 6V P-P)
2. Signal detection:
a) ~6V on Left speaker line (yellow/brown wire)
b) sound signal in any channel, low level detection
3. “REMOTE” amplifier activation
4. Ground loop isolation between High-Level and Line-Out.
Parameters:
1) Power consumption in sleep mode 250μA (0,25mA).
2) Power consumption in active state 8 mA (12 mA for 4 channel version).
3) Output “REMOTE” can drive up to 700 mA.
4) Wake up delay 200-300 ms.
5) Delay before “REMOTE”output deactivation is 10 seconds after falling of 6 V on loudspeakers' lines or ~ 4 minutes after sound signal disappearing (if 6 V was absent).
6) To allow two adapters work synchronously connect them through white wires.
More Information
By car brand
Universal (All brand)
Write Your Own Review
